A Wi-Fi 7 motherboard unlocks faster connections, lower latency, and the full potential of Wi-Fi 7 speeds in today’s builds. See the table for an overview of the Wi-Fi 7 motherboard top picks for 2025 builds, and then keep reading to see how Meter supports full-speed Wi-Fi 7 motherboard deployments.

Quick comparison: Best Wi-Fi 7 motherboards

*Pricing is based on historical costs, the availability of the product, and the seller’s terms.

**A price of $307.19 was found on microcenter.com for store pick-up (all out of stock). However, this price point is rare. This particular product has even seen volatile price hikes reaching into the $1k+ range.

Overview of Wi-Fi 7 technology

Wi-Fi 7 is the newest generation of wireless networking. It brings faster speeds, better performance in crowded spaces, and smoother use across many devices at once. However, although the Wi-Fi 7 hype is big, not everyone should necessarily rush to upgrade, depending on what your network needs are.  

The main upgrades include:

• 320 MHz channel width, which means more data can move at once
• 4096-QAM modulation, packing more data into each signal
• Multi-link operation (MLO), letting devices use more than one band at the same time

Together, these features allow for quicker downloads, less lag, and stronger signals even when many people are online.

Wi-Fi 7 also works better in offices, homes, and shared networks with lots of users or devices. It's designed for today’s high-bandwidth tasks like 4K video calls, cloud apps, AR/VR, and large file transfers—without dropping the connection.

For further detailed information, please check out our full breakdown article on Wi-Fi 7.

How is Wi-Fi 7 different from previous versions?

Wi-Fi 7 is up to 4.8 times faster than Wi-Fi 6, with big gains in real-world speed, latency, and capacity. It handles more data at once, which means smoother performance when many devices are active—like in offices, smart homes, or classrooms.

One of the biggest upgrades is MLO. Wi-Fi 7 can use multiple bands at the same time, making connections faster and more stable. Older versions like Wi-Fi 6E still use one band at a time per device. Wi-Fi 7 also brings better response times for real-time apps like video conferencing, gaming, and AR/VR. It’s built to manage heavier workloads with fewer slowdowns.

If you're comparing versions, our articles on Wi-Fi 6 vs. Wi-Fi 7 and Wi-Fi 6E vs. Wi-Fi 7 explain the differences in more detail.

The top Wi-Fi 7 motherboards for general use

Wi-Fi motherboards in 2025 offer strong options across both Intel and AMD platforms, combining next-gen connectivity with solid value. Here’s our top list based on features, reliability, and price-to-performance value.

1. ROG Maximus Z790 Dark Hero

The Maximus Z790 Dark Hero is ASUS’s high-end Z790 motherboard built for overclockers, high-performance gamers, and anyone planning a long-term Intel platform build.

As part of the ASUS Wi-Fi 7 lineup, it delivers advanced wireless performance and connectivity options that scale with next-gen demands. It supports 12th through 14th Gen Intel CPUs (LGA1700 socket), Wi-Fi 7, PCIe Gen 5.0, and DDR5 memory up to 8000 MT/s with XMP profiles and BIOS tuning.

Its 20+1+2 phase VRM design offers strong power delivery for demanding chips like the i9-14900K. ASUS’s advanced tuning software and onboard diagnostics tools help keep things stable even when pushing clocks or tightening memory timings.

The board features five M.2 slots (one at PCIe 5.0), reinforced PCIe x16 slots, and high-quality onboard audio via the ROG SupremeFX ALC4082 codec.

Thunderbolt 4 connectivity is available through dual USB-C ports, supporting fast transfer speeds and external display support. As a flagship ROG Wi-Fi 7 board, it integrates tri-band wireless and external antenna support—ready for high-throughput use with modern Wi-Fi 7 routers.

As of now, retail prices start around $460 and go higher depending on region, stock, and bundles. For those looking for a premium Intel motherboard that’s ready for heavy multitasking, gaming, or creative workloads, the Z790 Dark Hero sits firmly near the top of the current lineup.

Lowest listed price at Pangoly – $594.67

Pros:

• Excellent VRM for stable overclocking
• Native Wi-Fi 7 with strong antenna options
• Five M.2 slots including PCIe 5.0
• Thunderbolt 4 and extensive I/O

Cons:

• Large board footprint (ATX) may not suit compact cases
• Premium pricing, especially outside of discounts or bundles

2. Gigabyte X870E AORUS ELITE WIFI7

The X870E AORUS ELITE WIFI7 is one of the most feature-rich AM5 motherboards available at a mid-range price. It supports AMD Ryzen 7000, 8000, and 9000 series processors and brings full PCIe Gen 5.0 compatibility to both graphics and storage.

Native Wi-Fi 7 is included, along with USB4 support, high-speed DDR5 memory, and a well-designed VRM setup—making it an appealing choice for future-proof builds that don’t need enthusiast pricing.

Power delivery is handled by a 16+2+2 phase VRM (with 16 x 60A smart power stages), supported by Gigabyte’s Thermal Armor Advanced and M.2 Thermal Guard L for better heat control. This setup keeps the board stable under long workloads and light overclocking.

Memory support stretches up to 256GB of DDR5 across four DIMM slots, with speeds rated to DDR5-8200 (OC) using EXPO profiles.

Storage is also a strong point. The board offers four M.2 slots—three running at PCIe 5.0 x4 and one at PCIe 4.0 x4—plus four SATA ports for legacy drives.

Wi-Fi 7 is powered by a high-bandwidth tri-band module with a directional external antenna, which should deliver solid performance when paired with a compatible router. Wired connectivity is handled by a Realtek 2.5GbE LAN port.

Rear I/O is more competitive than expected at this price. Two USB4 40 Gbps Type-C ports are included, along with multiple USB 3.2 Gen 2 Type-A ports, HDMI, DisplayPort, and full audio jacks with SPDIF. The lack of Thunderbolt is a non-issue here due to USB4 compatibility.

Priced between $280 and $350, this board offers a complete feature set for most builders—including those planning multi-device, wireless-heavy environments.

Lowest listed price at Best Buy – $289.99

Pros:

• Three PCIe 5.0 M.2 slots plus USB4 support at a mid-range price
• Native Wi-Fi 7 with external high-gain antenna
• Stable VRM with good cooling for long-term reliability
• DDR5-8200 support and up to 256GB memory capacity

Cons:

• BIOS is functional but lacks advanced enthusiast tools.
• There’s no 10G LAN or Thunderbolt (though USB4 covers most needs).
• The layout is dense, so cable routing can get tight in smaller cases.

3. MAG Z890 TOMAHAWK WIFI

The MAG Z890 TOMAHAWK WIFI is MSI’s value-forward motherboard for Intel’s Core Ultra (Series 2) CPUs on the LGA 1851 socket.

Despite its sub-$400 price, it packs features usually reserved for much higher-end boards—including Wi-Fi 7, PCIe Gen 5.0, DDR5 up to 9200+ MT/s, and Thunderbolt 4. The power delivery setup includes a 16+1+1+1 Duet Rail Power System with 90A smart power stages.

Combined with extended heatsinks, a 6-layer PCB, and MOSFET thermal pads, the board runs cool and stable under sustained workloads. It’s not an extreme overclocker’s board, but it handles high-frequency memory and mid-tier CPUs with ease.

MSI includes four M.2 slots: one PCIe 5.0 x4, two PCIe 4.0 x4, and one hybrid slot that supports both PCIe 4.0 and SATA mode. You also get four SATA ports for legacy drives.

The networking stack is powered by an Intel Killer BE1750x Wi-Fi 7 module with tri-band support, plus a 5 Gbps Killer E5000 LAN port for high-speed wired connectivity.

While antenna details aren’t fully specified in the official specs, the board includes MSI’s EZ Antenna system for simplified setup.

Rear I/O is excellent for the price. The board features two Thunderbolt 4 Type-C ports supporting up to 40Gbps transfers and DisplayPort passthrough.

There are also seven USB 3.2 ports (Gen1 and Gen2), HDMI 2.1, and full audio jacks with optical S/PDIF. Onboard debug LEDs (EZ Debug and EZ Digit Debug) are also included—unusual at this tier and helpful for troubleshooting.

At $360, this board competes well with pricier models by offering full Wi-Fi 7 support, high memory ceilings, fast storage, and robust connectivity—all on Intel’s newest desktop platform.

Lowest listed price at Newegg – $359.99

Pros:

• One of the few LGA 1851 boards with Wi-Fi 7 under $400
• Supports DDR5 up to 9200+ MT/s and PCIe Gen 5.0 storage
• Includes 2x Thunderbolt 4 ports and 5Gbps LAN
• Built-in debug LEDs and clean board layout

Cons:

• Audio stack is basic compared to pricier boards
• Antenna performance not detailed (speculative)
• Fan control options not clearly defined in available specs

The top Wi-Fi 7 motherboards for enterprises

Enterprise users demand consistent wireless performance, strong remote management, and multi-year reliability. Here’s how the leading Wi-Fi 7 boards stack up.

4. ASUS ProArt X870E-CREATOR WIFI

The ProArt X870E-CREATOR WIFI is designed for creative professionals who need high-throughput connectivity, high memory capacity, and system stability across long workloads.

Built on the X870E chipset, it supports AMD Ryzen 7000, 8000, and 9000 series processors and provides native support for PCIe Gen 5.0, DDR5 memory, and Wi-Fi 7—without forcing users into workstation-tier pricing.

Power delivery comes from a 16+2+2 phase setup using 80A power stages, paired with VRM and chipset heatsinks large enough to support sustained compute tasks like 3D rendering, encoding, and complex simulations.

The board supports up to 256GB of DDR5 RAM, with overclocking headroom to DDR5-8000+ MT/s through EXPO profiles.

Storage is handled by four M.2 slots: two PCIe 5.0 x4 and two PCIe 4.0 x4, ideal for fast NVMe drives and RAID configurations. Four SATA 6 Gbps ports are also available for mass storage.

Wi-Fi 7 is onboard via a tri-band module supporting 2.4, 5, and 6 GHz bands. While ASUS lists their Q-Antenna system, the number and type of included antennas are not fully specified.

Rear I/O is professional-grade. The board includes two USB4 (Type-C) ports with up to 40 Gbps transfer speeds and DisplayPort 1.4 passthrough, useful for external displays, docks, or high-speed SSD enclosures.

Networking includes a Marvell 10GbE port and an Intel 2.5GbE port, giving creators bandwidth flexibility and fast project syncing across NAS or render nodes.

Priced between $540 and $600, it’s a strong fit for creative agencies, CAD workstations, and professionals who want modern connectivity and Ryzen’s multicore power without stepping into server territory.

Lowest listed price at Micro Center – $539.99

Pros:

• Two USB4 ports with DisplayPort passthrough and 40 Gbps support
• Dual LAN: Marvell 10GbE and Intel 2.5GbE
• Two PCIe 5.0 M.2 slots for ultra-fast storage
• DDR5 up to 8000+ MT/s with up to 256GB capacity
• Built for high-compute creative workloads

Cons:

• No RGB or gaming-centric features like boosted onboard audio
• Some claims like ISV certification or GPU passthrough are not documented
• Higher cost than general-use AM5 boards

5. Gigabyte X870 AORUS MASTER

The X870 AORUS MASTER is for builders who want top-end AM5 performance without jumping into full workstation territory. It supports AMD Ryzen 7000, 8000, and 9000 series processors, runs on the X870E chipset, and includes all the major next-gen features: Wi-Fi 7, PCIe Gen 5.0, DDR5 up to 8600 MT/s, and USB4.

Power delivery comes from a 16+2+2 VRM design. While exact amperage ratings aren’t listed in official specs, the board is clearly designed to handle high-core-count CPUs running at full tilt. Thermal management includes large VRM and chipset heatsinks, plus thermal guards across all M.2 slots to reduce heat buildup during long sessions.

The board has four M.2 slots—three run at PCIe Gen 5.0 speeds, with one at PCIe 4.0 x4—and four SATA 6Gbps ports. Gigabyte also separates Gen 5 and Gen 4 M.2 slots visually (silver and black), which helps builders optimize placement and cooling.

Networking includes a Realtek 5 Gbps LAN port and onboard Wi-Fi 7 through Qualcomm’s tri-band controller. That gives you fast, flexible connectivity for both wired and wireless setups, especially useful in content-heavy or cloud-based workflows. There's no built-in 10G ethernet, but available PCIe slots allow for easy upgrades.

Rear I/O includes two USB4 Type-C ports with DisplayPort video output, plus HDMI, 8x USB-A ports (Gen 2 and Gen 1), and optical S/PDIF audio. The BIOS is packed with tuning options and stability features, though new users may need time to get comfortable with its deeper settings.

The board sells in the $480–$500 range, placing it just under many workstation boards while delivering serious hardware features.

Lowest listed price at B&H – $477.99

Pros:

• Three PCIe Gen 5.0 M.2 slots and strong thermal design
• DDR5 support up to 8600 MT/s across four DIMMs
• Wi-Fi 7 with tri-band support and 5 Gbps LAN
• USB4 ports with DisplayPort passthrough and high-speed transfers

Cons:

• No built-in 10G LAN (but PCIe slots allow upgrades)
• BIOS is rich in features, but not beginner-friendly

6. Supermicro MBD-X13SAE

The Supermicro X13SAE is a workstation motherboard built for uptime, control, and long-term reliability. It's designed for IT teams, engineers, and enterprise users—not gamers or hobbyists.

This board focuses on performance, stability, and remote access — not looks or RGB. It supports Intel’s 12th, 13th, and 14th Gen Core processors on the LGA 1700 socket.

You can install up to 192GB of DDR5 ECC or non-ECC memory, ideal for systems that run critical workloads like modeling, data analysis, or 24/7 applications. ECC memory support helps avoid crashes from random errors, which is key for long-term reliability.

For storage, it includes three PCIe Gen 4.0 M.2 slots and eight SATA 6 Gbps ports. That gives enough flexibility to build out fast NVMe storage with space left for RAID-protected hard drives. It supports RAID 0, 1, 5, and 10.

The board doesn't come with built-in Wi-Fi, and there's no confirmed M.2 Key-E slot for adding a wireless card. Networking is handled through two Intel LAN ports: one 2.5GbE and one 1GbE. This setup works well for dual-network systems or remote access.

Remote control is one of its strengths. With support for Intel AMT and vPro, IT admins can monitor and manage the board remotely—even without a working OS. Graphics output is handled by an ASPEED AST2600 BMC chip, which allows BIOS-level video for headless systems or remote diagnostics.

Rear I/O includes HDMI 2.0b, DisplayPort 1.4a, and DVI-D (not VGA), along with several USB 3.2 and 2.0 ports. It also has 7.1-channel HD audio jacks, driven by the Realtek ALC888S codec. There’s no RGB lighting, debug screens, or flashy heatsinks—just a clean, functional layout.

Pricing runs from $430 to $675, depending on where you buy and whether you choose the IPMI-enabled variant.

Lowest listed price at Newegg – $459

Pros:

• ECC and non-ECC DDR5 memory support up to 192GB
• Remote management with AMT and onboard BMC
• Triple M.2 slots and 8 SATA ports with RAID options
• Dual Intel LAN (2.5GbE + 1GbE) for flexible networking
• Solid long-term platform for business systems

Cons:

• No onboard Wi-Fi and no confirmed wireless upgrade slot
• More technical setup than most consumer motherboards
• Plain aesthetics and minimal consumer-focused features

Other strong contenders to watch

Some Wi-Fi 7 motherboards offer excellent features or pricing but didn’t make the main list due to limited availability, incomplete U.S. rollout, or niche market fit.

ASUS ROG Crosshair X870E Extreme (launching soon)

Announced in April 2025, this AM5 board supports Ryzen 7000, 8000, and 9000 series CPUs and is built for high-performance setups. It offers premium features aimed at overclockers, system tuners, and pro builders.

Confirmed specs:

• 3 PCIe Gen 5.0 M.2 slots
• Dual ethernet (10GbE + 5GbE)
• 2x USB4 Type-C ports with DisplayPort passthrough (up to 40 Gbps)
• 4-inch customizable display over VRM heatsink
• DDR5 up to 8200+ MT/s (OC)
• Advanced tools like Dynamic OC Switcher and Core Flex

Why it’s here: The board isn’t available in U.S. retail stores yet, and there are no full reviews as of late April 2025. Estimated pricing sits between $1,000 and $1,400 USD.

Gigabyte Z890 AORUS ELITE WIFI7

The Z890 AORUS ELITE WIFI7 supports Intel Core Ultra processors (LGA 1851) and includes next-gen connectivity such as Wi-Fi 7, PCIe 5.0, and Thunderbolt 4. A solid layout, efficient cooling, and generous expansion options make it a go-to choice in the sub-$300 range.

Key features:

• DDR5 support up to 9200 MT/s (OC)
• Four M.2 slots (1 PCIe 5.0, 3 PCIe 4.0)
• Thunderbolt 4 (40 Gbps)
• Realtek 2.5GbE LAN
• Native Wi-Fi 7 and Bluetooth 5.4

MSRP lands at $289.99, making it ideal for mainstream Intel builds with plans to scale into high-performance hardware.

Gigabyte B850 AORUS ELITE WIFI7

Budget-conscious builders get strong value from the B850 AORUS ELITE WIFI7. Despite the price, it includes core features like PCIe Gen 5.0, DDR5, and native Wi-Fi 7.

Key features:

• DDR5 supports up to 8200 MT/s (OC), 256GB capacity
• Three M.2 slots (1 PCIe 5.0, 2 PCIe 4.0)
• Realtek or Qualcomm-based Wi-Fi 7
• 14+2+2 phase VRM power design
• Ryzen 7000 and newer support

Prices typically range between $229 and $249, making it a reliable pick for AMD users building around performance-per-dollar.

Tips for compatibility and installation

Getting the most out of a Wi-Fi 7 motherboard takes a few smart steps.

Start by checking router compatibility. Wi-Fi 7 routers with AFC (Automated Frequency Coordination) improve speeds on the 6 GHz band.

Update the BIOS to the latest version before installation. Firmware updates often unlock full wireless support and improve stability. Next, always install the included antennas. Wi-Fi 7 relies on strong, directional signal placement, and the bundled antennas are tuned for that setup.

Use PCIe 5.0 NVMe drives in Gen 5 M.2 slots to avoid performance slowdowns.

Not sure if your devices are ready? Our Wi-Fi 7 devices guide explains how to check for compatibility.

Benefits of Wi-Fi 7 motherboards: What to expect

Upgrading to a Wi-Fi 7 motherboard brings clear performance gains and long-term platform value.

Faster real-world speeds

Wi-Fi 7 offers much higher throughput than previous generations, with real-world gains in file transfers, cloud access, gaming, and video calls. Lag and buffering drop significantly when paired with a proper router.

Better long-term support

Boards with Wi-Fi 7 are built for newer router generations, wider channels, and modern spectrum usage. Most will stay relevant for 5 to 7 years. Skipping Wi-Fi 7 now could mean a costly upgrade later. Our Wi-Fi 7 value guide breaks down why.

Stronger performance under heavy load

MLO and wider channels (up to 320 MHz) help manage congestion better. That means smoother performance when multiple users or devices are online, especially in offices or high-traffic homes.

Wi-Fi 7 vs. ethernet is a real debate now. While ethernet still wins for ultra-low latency and stability, Wi-Fi 7 has narrowed the gap enough for many use cases—especially in flexible or mobile setups.

Frequently asked questions

Do all motherboards with Wi-Fi support Wi-Fi 7?

No, many motherboards with Wi-Fi still use older standards like Wi-Fi 5 or Wi-Fi 6. Only newer models built around Intel 700-series, AMD 600-series, or later chipsets support full Wi-Fi 7 features natively.

Are Wi-Fi 7 motherboards backward compatible with older Wi-Fi standards?

Yes, Wi-Fi 7 motherboards work with Wi-Fi 6, 5, and even earlier standards. Performance will adjust based on the network available.

Do I need a Wi-Fi 7 router to utilize the full benefits of a Wi-Fi 7 motherboard?

Yes, full Wi-Fi 7 performance requires both a Wi-Fi 7 motherboard and a Wi-Fi 7 router. Our Wi-Fi 7 release timeline explains router availability for 2025.

Can I upgrade my existing motherboard to support Wi-Fi 7?

Not fully. Add-in cards can provide basic Wi-Fi 7 support, but they won't deliver the same efficiency or multi-link operation as built-in solutions.

Are budget-friendly Wi-Fi 7 motherboard options available?

Yes, models like the MSI MAG Z890 TOMAHAWK WIFI and Gigabyte B850 AORUS ELITE WIFI7 offer Wi-Fi 7 under $400.

Wi-Fi 7 motherboard integration with Meter's managed networks

Meter’s managed network service is built to support Wi-Fi 7 motherboards at full speed. We handle setup, hardware, monitoring, and long-term maintenance—no extra strain on your IT team.

Wi-Fi 7–ready access points will be available for upgrades starting in 2025, making it easy to adopt next-gen wireless without reworking your infrastructure.

Key features of Meter Network include:

• Vertically integrated: Meter-built access points, switches, security appliances, and power distribution units work together to create a cohesive, stress-free network management experience.
• Managed experience: Meter provides proactive user support and done-with-you network management to reduce the burden on in-house networking teams.
• Hassle-free installation: Simply provide an address and floor plan, and Meter’s team will plan, install, and maintain your network.
• Software: Use Meter’s purpose-built dashboard for deep visibility and granular control of your network, or create custom dashboards with a prompt using Meter Command.
• OpEx pricing: Instead of investing upfront in equipment, Meter charges a simple monthly subscription fee based on your square footage. When it’s time to upgrade your network, Meter provides complimentary new equipment and installation.
• Easy migration and expansion: As you grow, Meter will expand your network with new hardware or entirely relocate your network to a new location free of charge.

To learn more, schedule a demo with Meter.